How loud is the freeze dryer pump? The pump operates at about 65-75 decibels, similar to a normal conversation or dishwasher. Many customers place their freeze dryer in a garage or separate room for quieter operation.
It's so much easier to stay on a low carb diet when you have things to nibble on. I've been drying meatballs (cut them in half first), and they make a fantastic savory snack. I'll post to the Tried and True thread when I get a chance.
I have no adverse vacuum performance change with the catch can in place. It just catches any oil. I still smell oil vapor when the pump first starts up, but not nearly as much. I've only emptied the can once or twice since I've had it installed. I slightly over filled the pump and it blew out into the can, then ran it with the FDer valve open for a few minutes. Nothing got past the can. I used the outside port as IN and the middle one as out. I did take the port off and the longer one should be the inlet port. It's not a great deal longer. Tony Edited January 22, 2016 by TonyC updated (log)
When isolated, the pump seems to behave well. Short of putting a meter on the pump, my impression is that it is operating properly. I'm considering investing in a good meter to verify that it is reaching a good ultimate vacuum.
Unlike canning or dehydrating, freeze drying retains 97 percent of the food’s nutrients. Freeze dried food also tastes more like fresh food than canned or dehydrated foods.
With various options available in terms of size and capacity, it's crucial to assess your needs before making a decision.
I did wonder though, since this is gravity flow and not pressure driven as on a car, if having the filter mounted horizontally might result in using only "half" the filter, as the oil would tend to travel through the low side of the filter -- although in practice, I suppose, as the filter material gets plugged it would force the fluid level higher.
So I corrected the oversight - I drilled and tapped the elbow to add the port. Here is a picture. It worked great today when I flushed the pump to clear out the gunk.
14 Posted December 16, 2015 (edited) On 7/31/2015 at 11:12 PM, TonyC said: Somehow this post got posted twice so I'll edit the second one with some more useful information. I remember reading somewhere in this thread where somebody was asking how long you run the freeze cycle with pre-frozen food. I have my chest freezer set to -12F, and I usually let the freeze dryer cool for an hour before I put the frozen food in. After I load the food in I wait another half hour to start the drying process. I've had a lot of cycles that the total time between pulling one batch out and starting the drying cycle on the next is around 2 hours. I'm running mine in a cold garage, so it cools down pretty quickly. If you have yours in a warm room it would probably take a little longer.
Pre-frozen food takes less time to process since the machine doesn’t have to completely freeze the food. Your climate (humidity and temperature) can also affect the cycle length. My average load takes around 24 hours, but it can be significantly longer.
Not all of us are technical experts (the 'not' category includes me) but I hope someone who can help you will come along soon.
Another best practice is to set up a station. This will take space. Having a freeze dryer, freezer, prep table, and processing area all together has been a good decision. It can all be done in a large kitchen, but the machines are noisy more info and a freeze-drying project can take up a lot of space.
5. Noise Concerns: If noise levels become excessive during operation, ensure that all components are securely attached and functioning properly; consider placing the unit in a less frequented area if necessary.
Slight delay at customs but my head was spinning at how fast this was resolved for something that was out of there control! Bravo!